Tools and Materials:
* Jack and jack stands
* Lug wrench
* Socket set
* Flathead screwdriver
* Pliers
* New wheel bearing
Instructions:
1. Park your car on a level surface and apply the parking brake.
2. Loosen the lug nuts on the affected wheel, but do not remove them completely.
3. Jack up the car until the affected wheel is off the ground.
4. Place a jack stand under the vehicle near the affected wheel to support its weight.
5. Remove the lug nuts and take off the wheel.
6. Use a flathead screwdriver to pry the dust cap off of the wheel bearing.
7. Use a socket wrench to remove the bolts that hold the wheel bearing in place.
8. Using pliers pull out the worn out wheel bearing by grasping the outer diameter.
9. Clean the wheel bearing housing and insert the new wheel bearing and securing it place with new bolts.
10. Reinstall the dust cap. Replace the wheel, the lug nuts, lower the vehicle by jack, tighten the lug nuts and remove the jack stand to complete the repair.
