* Replacement door handle
* Phillips head screwdriver
* Flat head screwdriver
* T25 Torx bit
* T30 Torx bit
Step 1: Remove the door panel.
1. Use a Phillips head screwdriver to remove the two screws that hold the door handle in place.
2. Use a flat head screwdriver to pry up the door panel.
3. Once the door panel is pried up, use your hands to remove it.
Step 2: Remove the old door handle.
1. Use a T25 Torx bit to remove the two screws that hold the door handle in place.
2. Once the screws are removed, pull the door handle out of the door.
3. Disconnect the electrical connector from the door handle.
Step 3: Install the new door handle.
1. Connect the electrical connector to the new door handle.
2. Insert the new door handle into the door.
3. Use a T25 Torx bit to install the two screws that hold the door handle in place.
Step 4: Replace the door panel.
1. Position the door panel onto the door.
2. Use your hands to press down on the door panel until it snaps into place.
3. Use a Phillips head screwdriver to install the two screws that hold the door handle in place.
Step 5: Test the door handle.
Open and close the door several times to make sure that the door handle is working properly.
