How do you replace bulb in digital clock BMW Z3?

Tools:

- Small flat-head screwdriver

- A pair of tweezers

Materials:

- Replacement bulb (check the owner's manual for the correct type)

Instructions:

1. Unplug the clock:** Locate the power plug for the digital clock. It is usually located on the back of the clock. Unplug it from the power outlet.




2. Remove the clock from its housing:** Use a small flat-head screwdriver to pry open the housing of the clock. Once the housing is open, you will see the bulb inside.




3. Remove the old bulb:** Gently remove the old bulb from the clock. Be careful not to drop the bulb.




4. Insert the new bulb:** Use tweezers or small flat-head screwdriver to insert the new bulb. Be careful not to touch the new bulb with your fingers, as this can cause it to overheat and burn out quickly.




5. Put the clock back together:** Snap the housing of the clock back together. Make sure that it is securely closed.




6. Plug in the clock:** Plug the power plug into the power outlet and turn on your BMW.

>Note: If the new bulb does not light up, check the fuse for the clock. If the fuse is blown, replace it with a new fuse of the same size.

Your digital clock should now be working properly with the new bulb.