Auto >> AutoSPT >  >> Auto Repair

How do you fix automatic window in 2000 vw jetta. It is the driver side window.The wont roll up but I can hear motor going?

Here are some suggested steps you can follow to try and fix the automatic window in your 2000 VW Jetta:

1. Check the window switch:

- Ensure that the window switch is functioning correctly. Try operating the switch multiple times to see if the window responds. If the window doesn't roll up or down with the switch, the switch itself may be faulty and need replacement.

2. Inspect the window regulator:

- The window regulator is the mechanism that raises and lowers the window glass. If the motor is running but the window doesn't move, the regulator could be damaged or obstructed. Check for any visible damage or obstructions in the window regulator mechanism.

3. Lubricate the window tracks:

- Over time, the window tracks can become dry and cause the window to move slowly or get stuck. Apply a silicone-based lubricant to the tracks to reduce friction and improve the movement of the window glass.

4. Check the window motor:

- If the window motor is making noise but not moving the window, the motor itself may be faulty. You can try disconnecting and reconnecting the motor to see if it resolves the issue. If the motor is damaged, it may need to be replaced.

5. Reset the window control module:

- Some vehicles have a window control module that manages the operation of the power windows. Try resetting the module by disconnecting the battery for a few minutes and then reconnecting it. This may resolve any electrical glitches affecting the window operation.

6. Seek professional help:

- If you're not comfortable performing these steps or if the issue persists, it's best to seek assistance from a qualified mechanic or automotive technician. They will be able to diagnose the exact problem and perform the necessary repairs or replacements to get your window working properly again.

Additional tips:

* When testing the window switch, try holding it in the up position for a few seconds after the window reaches the top. This can help initialize the window control module and ensure proper operation.

* If the window regulator is damaged, it's important to replace it with a high-quality part to ensure long-term functionality.

* When lubricating the window tracks, make sure to use a silicone-based lubricant that won't attract dirt and debris.