1. Small flat-head screwdriver
2. Phillips-head screwdriver
3. Replacement bulb
Instructions:
1. Open the trunk of your Beetle.
2. Locate the access panel on the interior side of the trunk lid.
3. Pry open the access panel with a small flat-head screwdriver.
4. Locate the turn signal bulb socket on the back of the access panel.
5. Turn the bulb socket counterclockwise to remove it.
6. Remove the old light bulb from the socket.
7. Insert the new light bulb into the socket.
8. Turn the bulb socket clockwise to secure it in place.
9. Close the access panel.
10. Test the turn signal to make sure it is working properly.
