2. Disconnect the negative battery cable. This will help to prevent any electrical shocks while you are working.
3. Raise the front of the car and support it with jack stands. Make sure that the car is stable before proceeding.
4. Locate the starter. The starter is located on the passenger side of the engine, near the bottom.
5. Disconnect the electrical connections to the starter. There will be two electrical connections: a large positive cable and a smaller wire that connects to the solenoid.
6. Remove the starter bolts. There will be two or three bolts that hold the starter in place. Remove these bolts using a socket wrench.
7. Take the old starter out of the car.
8. Inspect the starter for damage. If the starter is damaged, you will need to replace it with a new one.
9. Reinstall the starter in the reverse order of removal. Make sure that the starter bolts are tightened securely.
10. Reconnect the electrical connections to the starter.
11. Reconnect the negative battery cable.
12. Lower the front of the car and remove the jack stands.
13. Start the car and test the starter. The starter should crank the engine without any hesitation.
