===
Tools and Materials
- Replacement headlight bulb (H7 type)
- Phillips head screwdriver
- Flathead screwdriver
- Pliers
Instructions
===
1. Prepare the vehicle.
- Turn off the engine and allow it to cool down.
- Engage the parking brake.
- Open the hood of the vehicle.
2.Locate the headlight assembly.
- The headlight assembly is located at the front of the vehicle, on either side of the grille.
3. Remove the headlight cover.
- Use a Phillips head screwdriver to remove the screws that secure the headlight cover.
- Once the screws are removed, carefully remove the headlight cover.
4. Remove the old headlight bulb.
- Use a flathead screwdriver to pry open the metal clip that holds the headlight bulb in place.
- Once the clip is open, carefully remove the old headlight bulb from the socket.
5. Install the new headlight bulb.
- Insert the new headlight bulb into the socket, making sure that it is properly seated.
- Use the metal clip to secure the new headlight bulb in place.
6. Replace the headlight cover.
- Carefully replace the headlight cover, making sure that it is properly seated.
- Secure the headlight cover with the Phillips head screws that you removed earlier.
7. Test the new headlight bulb.
- Turn on the headlights and check to make sure that the new headlight bulb is working properly.
Tips
- If you are replacing the headlight bulbs on both sides of the vehicle, it is best to do one side at a time to avoid confusion.
- Be careful not to drop the headlight bulbs, as they can be fragile.
