1. Safety First:
Before starting any repairs, ensure the barber chair is unplugged from the power source. This will prevent accidental electrical shocks.
2. Locate the Problem:
- Examine the chair for signs of leaks or damage.
- Wiggle the chair to see if it's loose or unstable.
- Check if the chair raises or lowers smoothly or is stuck in a certain position.
3. Check Hydraulic Fluid:
- The most common issue with hydraulic chairs is low or leaking fluid.
- If the chair is low on fluid, it might not be able to lift properly.
- Check the reservoir for leaks and refill it if necessary with the recommended hydraulic fluid.
4. Bleed the Air:
- Air pockets can also cause issues. To bleed the air, loosen the bleeder valve, typically located near the base of the chair.
- Allow air to escape until a steady stream of fluid comes out. Tighten the bleeder valve once complete.
5. Check Gas Spring:
- The gas spring is a cylinder that helps the chair rise and fall.
- If it's damaged or faulty, it needs to be replaced.
6. Inspect Control Valve:
- The control valve regulates the flow of hydraulic fluid.
- If it's jammed or damaged, it can affect the chair's movement.
7. Tighten Loose Components:
- Over time, some components may become loose, causing issues.
- Check for any loose bolts or screws and tighten them securely.
8. Call a Professional:
- If the issue persists or if you're uncomfortable with DIY repairs, it's best to contact a professional repair service. They have the expertise and tools to properly diagnose and fix the problem.
9. Regular Maintenance:
- To prevent problems, regularly inspect and maintain the barber chair.
- Clean spills or debris, lubricate moving parts, and check for signs of wear and tear.
Remember that hydraulic chairs can contain high-pressure fluid and springs, so safety should always be the top priority. If you're not confident in your ability to repair the chair, it's advisable to seek professional help to ensure the continued safety of your clients and your business.
