Check the water tank: Ensure the water tank is filled with enough water. If it's empty or below the minimum level, fill it up with clean, warm water.
Inspect the water hose: Check the water hose for any kinks or blockages. Straighten out any bends and remove any obstructions that may be preventing water from flowing through.
Clean the nozzle: The nozzle of the shampooer might be clogged with dirt, debris, or cleaning solution. Remove the nozzle and rinse it thoroughly under warm water. Use a soft brush to remove any stubborn dirt.
Check the filter: The filter in the shampooer might be clogged, restricting water flow. Remove the filter and rinse it under warm water. Allow it to dry completely before reinstalling it.
Inspect the pump: If the water pump is faulty, it may not be able to generate enough pressure to spray the cleaning solution. Check the pump for any visible damage or leaks. If it appears damaged, you may need to replace it.
Examine the motor: The motor of the shampooer is responsible for driving the pump. If the motor is damaged, it may not be able to provide enough power to the pump. Check the motor for any signs of damage, such as overheating or burning. If the motor appears damaged, it will need to be replaced.
Check the electrical connections: Make sure the shampooer is properly plugged into an electrical outlet and that the power cord is not damaged.
If you have tried all of these steps and the shampooer still does not spray, it may be necessary to take it to a professional for repair.
