- A flat-head screwdriver
- A Phillips-head screwdriver
- A socket wrench
- A 10 mm socket
Instructions:
1. Begin by inserting the flat-head screwdriver into the gap between the mirror glass and the mirror housing.
2. Gently pry the mirror glass out of the housing.
3. Disconnect the electrical connector from the back of the mirror glass.
4. Use the Phillips-head screwdriver to remove the three screws that secure the mirror housing to the door.
5. Remove the mirror housing from the door.
6. Transfer the electrical connector and the mirror glass from the old mirror housing to the new mirror housing.
7. Secure the new mirror housing to the door using the three screws that you removed in step 4.
8. Tighten the screws until the mirror housing is secure.
9. Replace the mirror glass by pressing it into the mirror housing until it snaps into place.
Your new wing mirror is now installed!
