1. Gather your tools. You will need a Phillips head screwdriver, a flathead screwdriver, and a pry tool.
2. Locate the window crank. There is a small plastic cover around the window crank. Use a flathead screwdriver to pry off this cover.
3. Remove the window crank. Once the plastic cover is removed, you will see a large screw securing the window crank. Use a Phillips head screwdriver to remove this screw. Pull off the window crank.
4. Remove the door handle cover. There is a plastic cover over the door handle. Use a flathead screwdriver to pry off this cover.
5. Remove the screws. There are two screws holding the door trim in place. One is located behind where the door handle was. The other is located near the bottom of the door trim. Use a Phillips head screwdriver to remove these screws.
6. Pry the door trim off. Starting from the bottom corner, pry the door trim off of the door. Be careful not to damage the trim.
7. Disconnect the manual window winder. The manual window winder is connected to the door trim with a cable. Disconnect the cable from the window winder.
8. Remove the door trim. Once the manual window winder is disconnected, you can remove the door trim from the door.
