1. Ensure that the vehicle is in park and that the parking brake is engaged.
2. Press and hold the "Unlock" button on the remote control for five seconds. The red security indicator light on the dashboard should begin flashing.
3. Within five seconds, press the "Memory" button on the garage door opener. The indicator light will stop flashing and remain solid.
4. Within 30 seconds, press and hold the remote control button that you want to program for five seconds. The garage door should open or close.
5. Repeat steps three and four for any additional remote controls that you want to program.
6. Press and hold the "Unlock" button on the remote control for five seconds to exit the programming mode.
If the garage door opener does not respond after following these steps, you may need to refer to the owner's manual for specific instructions for your model.
