- Philips screwdriver
Instructions
Step 1: Pry off the black plastic cap using a Philips screwdriver.
Step 2: There are two or three screws holding the brackets together. Unbolt the screws under the black cap.
Step 3: Remove the mirror from the bracket. Gently pry the bottom of the mirror up and off of the bracket.
Step 4: Now you can see how the button is held in place. Take a screw driver and pry the old button out.
Step 5: Take the new button and push the tabs until they snap into place.
Step 6: Reattach the mirror to the bracket.
Step 7: Reinstall the screws to hold the bracket together.
Step 8: Replace the black plastic cap onto the bracket.
