1. Locate the ignition switch. The ignition switch is located on the right side of the steering column, just below the steering wheel.
2. Remove the ignition switch cover. The ignition switch cover is held in place by two screws. Remove the screws and pull off the cover.
3. Bypass the ignition switch. You will see two wires coming out of the ignition switch. One wire is black and the other is red. The black wire is the ground wire and the red wire is the power wire. To bypass the ignition switch, you need to connect the black wire to the red wire.
4. Start the car. Once you have connected the black wire to the red wire, the car should start.
Here are some additional tips for starting a 1995 Honda Accord without a key:
- If you are using a screwdriver or other metal object to bypass the ignition switch, be careful not to touch any other wires under the dashboard. This could cause a short circuit and damage your car.
- If you are unable to start the car using the above steps, you may need to take it to a mechanic to have it diagnosed.
Note: Bypassing the ignition switch is a temporary fix. It is important to have the ignition switch replaced as soon as possible.
