1. Safety First: Engage the parking brake, chock the wheels, and ensure the vehicle is stable and raised securely on jack stands.
2. Disconnect the Battery: As a safety precaution, disconnect the negative terminal of the battery.
3. Remove the Air Filter Housing: To access the transmission mount, remove the air filter housing. This may involve disconnecting the air intake hose and loosening a few bolts or clamps.
4. Locate the Transmission Mount: The Camaro IROC has two transmission mounts: one at the front and one at the rear. Locate both of them.
5. Support the Transmission: Place a transmission jack or another suitable support underneath the transmission to prevent it from dropping when removing the mounts.
6. Remove Front Transmission Mount:
- Unbolt the bolts securing the front transmission mount to the transmission and the frame or crossmember.
- Once all bolts are removed, carefully remove the old transmission mount.
7. Install the New Front Mount:
- Position the new front mount in place, aligning the holes.
- Secure it with the bolts you removed earlier, tightening them to the manufacturer's recommended specifications.
8. Remove Rear Transmission Mount:
- Locate the bolts holding the rear mount in place. These may be more difficult to reach.
- Remove all the bolts to take off the old rear transmission mount.
9. Install the New Rear Mount:
- Position the new rear mount into place and align the holes with the frame.
- Secure the mount with the bolts, tightening them to the specified torque.
10. Reinstall the Air Filter Housing: Once the transmission mounts are replaced, reinstall the air filter housing and any parts or hoses you removed during the process.
11. Double-Check: Ensure that all bolts are tightened properly and all components are securely in place.
12. Reconnect the Battery: Reconnect the negative terminal of the battery.
13. Test Drive: Take the vehicle for a short drive to test if the transmission shifts smoothly and there are no abnormal noises or vibrations.
14. Lower the Vehicle: Carefully lower the vehicle from the jack stands.
15. Clean Up: Clean up any tools or materials used during the repair.
It's important to be cautious and use appropriate safety equipment while performing this repair. The engine and transmission bay can be cramped and hot, so take necessary precautions to avoid injuries. If you're not comfortable performing the task or don't have the necessary tools, consider seeking assistance from a qualified mechanic.
