Tools and Materials Needed:
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Torx T25 Driver
- 9006 Headlight Bulb
Instructions:
1. Open the LeSabre's hood and remove the plastic cover to access the passenger-side headlight assembly.
2. Remove the two screws securing the headlight assembly to the grill.
3. Use the Torx T25 driver to remove the four screws surrounding the headlight bulb.
4. Gently pry the headlight bulb from the housing using a flathead screwdriver.
5. Disconnect the electrical connector from the rear of the bulb.
6. Insert the new bulb and connect the electrical connector.
7. Replace the four screws securing the headlight bulb.
8. Reattach the headlight assembly to the grill using the two screws.
9. Replace the plastic cover and close the hood.
Repeat the process for the driver's side headlight.
