1. Disconnect the negative battery cable.
2. Remove the door panel.
3. Remove the water shield from the door.
4. Disconnect the electrical connector from the window motor.
5. Remove the three bolts that hold the window motor to the door.
6. Lift the window motor out of the door.
To install the window motor on a 1993 Ford Ranger, follow these steps:
1. Place the window motor into the door.
2. Install the three bolts that hold the window motor to the door.
3. Connect the electrical connector to the window motor.
4. Install the water shield from the door.
5. Install the door panel.
6. Connect the negative battery cable.
