* Set of wrenches
* Socket set
* Screwdriver
* Pry tool
* Pliers
* Safety glasses
Instructions:
1. Disconnect the battery. This will prevent any electrical shock while you are working on the window motor.
2. Remove the door panel. There are usually a few screws that hold the door panel in place. Once the screws are removed, you can pry the door panel off with a pry tool.
3. Locate the window motor. The window motor is usually located inside the door, behind the door panel.
4. Disconnect the electrical connector from the window motor.
5. Remove the bolts that hold the window motor in place. There are usually two or three bolts that hold the window motor in place.
6. Remove the window motor from the door.
7. Install the new window motor. Insert the new window motor into the door and secure it with the bolts that you removed in step 5.
8. Connect the electrical connector to the window motor.
9. Reinstall the door panel.
10. Reconnect the battery.
Tips:
* If you are not comfortable working on electrical components, you may want to take your car to a mechanic to have the window motor replaced.
* Make sure that you have the correct window motor for your car. There are different window motors for different models and years of cars.
* Be careful not to drop the window motor when you are removing it from the door.
* If the window motor is stuck, you may need to use a pry tool to pry it out of the door.
