1. Park your vehicle on a level surface and apply the parking brake.
2. Open the rear liftgate.
3. Locate the tail light assembly on the driver's side.
4. Twist the tail light assembly counterclockwise and pull it out to release it from the vehicle.
5. Remove the bulb holder from the tail light assembly by pushing in on the tab and pulling it out.
6. Twist the bulb counterclockwise and remove it from the bulb holder.
7. Insert a new bulb into the bulb holder and twist it clockwise to secure it.
8. Reinsert the bulb holder into the tail light assembly.
9. Push and twist the tail light assembly back into place until it locks.
10. Close the rear liftgate.
Here are some additional tips:
- Make sure that the new bulb is the same type as the old bulb.
- If you have difficulty turning the bulb, use a pair of pliers to help you grip it.
- Be careful not to drop the bulb.
