Park your car and engage the parking brake.
Open the tailgate.
Locate the brake light assembly. It is located on the side of the vehicle, just below the rear window.
Turn the bulb counterclockwise to remove it.
Insert the new bulb into the socket and turn it clockwise to tighten it.
Test the brake light to make sure it is working properly.
Here are some additional tips:
* Make sure that the new bulb is the correct type.
* If the bulb does not work after you have replaced it, check the fuse.
* If the fuse is blown, replace it with a new fuse of the same amperage.
