1. Gather your tools and materials.
- Replacement headlights
- Phillips head screwdriver
- Socket wrench set
2. Locate the headlight mounting screws.
- Open the hood of your Mirage and locate the headlight mounting screws.
- There are two screws located on the top of the headlight housing and one on the bottom.
3. Remove the mounting screws.
- Use a Phillips head screwdriver to remove the two screws on the top of the headlight housing.
- Then use a socket wrench to remove the bolt on the bottom of the housing.
4. Remove the headlight housing.
- Once all three mounting screws have been removed, gently pry the headlight housing from the car.
- Be careful not to drop the headlight housing.
5. Disconnect the electrical connector.
- There is an electrical connector attached to the back of the headlight housing.
- Disconnect this connector by pressing the release tab and pulling it apart.
6. Remove the old headlight bulb.
- Turn the headlight bulb counterclockwise to remove it from the housing.
7. Install the new headlight bulb.
- Insert the new headlight bulb into the housing and turn it clockwise to secure it.
8. Reconnect the electrical connector.
- Reconnect the electrical connector by pressing the release tab and pushing it together.
9. Reinstall the headlight housing.
- Gently insert the headlight housing into the car and secure it with the three mounting screws.
10. Close the hood.
- Close the hood of your Mirage and enjoy your new headlights!
