Auto >> AutoSPT >  >> Auto Repair

1990 Plymouth laser turn over and sounds like starter teeth are broke off?

There are a few reasons why your 1990 Plymouth Laser may be turning over but not starting. One possibility is that the starter teeth are broken off. This can happen if the starter motor is not properly engaged with the flywheel. Another possibility is that the battery is not providing enough power to the starter motor. This can happen if the battery is old or damaged, or if the battery cables are not properly connected. Finally, it is also possible that there is a problem with the ignition switch. This can happen if the switch is worn out or damaged.

To diagnose the problem, you will need to inspect the starter motor, battery, and ignition switch. You can do this yourself, or you can take your car to a mechanic. If you are not comfortable working on cars, it is best to take it to a mechanic.

Here are some tips for diagnosing the problem:

* Check the starter motor. The starter motor is located on the front of the engine. It is a cylindrical-shaped object with a solenoid on one end. To inspect the starter motor, you will need to remove the air cleaner housing. Once the air cleaner housing is removed, you will be able to see the starter motor. Look for any signs of damage, such as cracks or broken teeth.

* Check the battery. The battery is located in the trunk of your car. To inspect the battery, you will need to open the trunk and remove the battery cover. Once the battery cover is removed, you will be able to see the battery. Look for any signs of damage, such as corrosion or swelling.

* Check the ignition switch. The ignition switch is located on the dashboard of your car. To inspect the ignition switch, you will need to remove the steering wheel cover. Once the steering wheel cover is removed, you will be able to see the ignition switch. Look for any signs of damage, such as wear or cracks.

If you find any signs of damage to the starter motor, battery, or ignition switch, you will need to replace the damaged part. You can do this yourself, or you can take your car to a mechanic.