How do you get the turn signal assembly out of your 1991 Ford F-150?

Steps to remove the turn signal assembly:

1. Park your vehicle on level ground and engage the parking brake.
2. Remove the two screws that secure the turn signal assembly to the vehicle. Remove the screws that secure the turn signal assembly to the vehicle.
3. Insert a flat-head screwdriver between the housing and the trim plate
4. Gently pry the two pieces apart until the trim plate is completely removed.
5. Unscrew the two bolts that hold the assembly to the vehicle's frame.
6. Once the bolts are removed, you can carefully pull the turn signal assembly out of the vehicle.
7. Disconnect the electrical connector from the back of the turn signal assembly.
8. Remove the turn signal assembly from the vehicle.

Note: Be careful not to damage the wiring when disconnecting the electrical connector.