- New wiper blades (specific to your vehicle model)
- Soft cloth
- Mild detergent
- Water
Step-by-Step Instructions:
1. Lift the Wiper Arms:
-Turn off the engine and make sure the wiper blades are in the "down" position.
-Locate the release levers or buttons on the wiper arms. These levers are typically located near the base of the wiper arms.
-Press or slide the release levers to lift the wiper arms up and away from the windshield.
2. Remove the Old Blades:
-Once the wiper arms are lifted, you can remove the old wiper blades.
-Hold the wiper blade assembly and press down on the release tab or button.
- Slide the old blade out of the wiper arm.
3. Clean the Wiper Arms:
- Before installing the new wiper blades, take the time to clean the wiper arms.
- Use a soft cloth and mild detergent mixed with water to gently clean the arms and remove any dirt, grime, or debris.
4. Insert the New Wiper Blades:
- Take the new wiper blades and align them with the wiper arms.
- Insert the blades into the wiper arm until they snap into place.
- Make sure the blades are securely fastened.
5. Test the Wiper Blades:
- Turn on the windshield wipers and test them to make sure they are working properly.
- Observe the blades for smooth movement and proper contact with the windshield.
- Adjust the wiper arm position if necessary to ensure optimal wiping performance.
6. Lower the Wiper Arms:
- Once you are satisfied with the wiper blade installation and functionality, lower the wiper arms back to their normal resting position.
Remember, always follow the specific instructions and guidelines recommended by your vehicle's owner's manual for the safe and proper replacement of wiper blades.
