1. Open the hood.
2. Locate the glove box latch on the right-hand side of the engine bay.
3. Pull the cable out of the latch.
4. Locate the cable adjustment screw on the left-hand side of the engine bay.
5. Turn the adjustment screw until the cable is snug but not too tight.
6. Reinstall the cable into the latch.
7. Close the hood.
Tips:
* If you cannot find the cable adjustment screw, it may be located under the dashboard.
* You may need to use a flashlight to see the cable and adjustment screw.
* Be careful not to over-tighten the cable, as this can damage the latch.
