1. Turn off the ignition and make sure the engine is completely cool.
2. Locate the OBD-II port under the dashboard, usually near the steering column or center console.
3. Connect an OBD-II scanner or code reader to the port. If you don't have one, you can purchase it online or borrow it from an auto parts store.
4. Turn on the ignition, but do not start the engine.
5. Follow the prompts on the scanner to access the vehicle's diagnostic menu.
6. Look for the option to "clear trouble codes" or "reset check engine light". Select this option.
7. The scanner will clear the stored trouble codes and the check engine light should turn off.
8. Turn off the ignition and disconnect the scanner.
9. Start the engine to verify that the check engine light has been reset.
Please note that this procedure is generally applicable for resetting engine check lights, but it's always best to refer to your vehicle's owner's manual or a qualified mechanic for specific instructions.
