- Flathead screwdriver
- Phillips head screwdriver
- Small wrench
Instructions:
1. Locate the wiper crank arm. It is located on the passenger side of the vehicle, just below the windshield.
2. Use a flathead screwdriver to pry the cover off of the wiper crank arm.
3. Remove the three Phillips head screws that hold the wiper crank arm in place.
4. Carefully remove the wiper crank arm from the vehicle.
5. Place the new wiper crank arm in position and secure it with the three Phillips head screws.
6. Replace the cover on the wiper crank arm and snap it into place.
