- Jack and jack stands
- Socket set
- 3/8-inch drive ratchet
- 1/4-inch drive ratchet
- 15mm socket
- 13mm socket
- 10mm socket
- 8mm socket
- Flathead screwdriver
- Phillips head screwdriver
- Brake fluid
- Brake cleaner
- Caliper grease
- C-clamp
Additional Notes:
- Make sure the car is in "Park" and the parking brake is engaged before beginning.
- Use a C-clamp to compress the caliper piston back into its bore after removing the old brake pads.
- Be sure to clean the brake components with brake cleaner before reinstalling the new pads and calipers.
- Do not reuse old brake fluid.
- Properly dispose of old brake fluid according to local regulations.
