Ensure the car is parked safely and the engine is turned off.
Open the rear doors of the car.
Locate the two bolts holding the bottom of the seat cushion to the floor. They should be visible at the front edge of the seat.
Use a wrench to loosen and remove the bolts.
Lift up the front edge of the seat cushion and slide it out from under the rear speakers.
Rest it against the front seats.
Locate the two bolts holding the seat back in place. They will be visible at the top of the seat back.
Use a wrench to loosen and remove the bolts.
Pull the seat back up and out of the car.
Make sure you remove the upper and lower seat belt anchors before removing the back seat.
Repeat the process on the other side of the car.
