* Wrench set
* Allen wrench
* Bolt cutters
* Safety goggles
Instructions:
1. Engage the parking brake and turn off the engine.
2. Open the hood and locate the air conditioning compressor.
3. Remove the electrical connector from the compressor.
4. Use the wrench set to loosen and remove the bolts holding the compressor to the engine block.
5. Once the bolts are removed, use the Allen wrench to turn the compressor counterclockwise until it is loose.
6. Disconnect the high and low-pressure lines from the compressor.
7. Use the bolt cutters to cut the refrigerant line.
8. Lift the compressor out of the engine compartment and dispose of it properly.
