* Replacement right taillight assembly
* Socket wrench set
* Phillips-head screwdriver
* Flashlight
* Jack and jack stands
Procedure:
1. Open the vehicle's rear liftgate and locate the two plastic covers on either side of the taillight assembly.
2. Remove the plastic covers by pushing down on the tab and lifting them up.
3. Remove the two bolts holding down the taillight assembly with the socket wrench.
4. Disconnect the electrical connector by pressing down on the tab and pulling the connector apart.
5. Carefully lift out the taillight assembly and place it on a protected surface.
6. Reverse steps 1-5 to install the replacement taillight assembly.
