1. Disconnect the battery. This is to prevent any accidental electrical shocks.
2. Remove the steering wheel. This can usually be done by removing the bolts that hold the steering wheel in place.
3. Remove the steering column cover. This is usually held in place by a few screws.
4. Locate the ignition switch. It is usually located on the right side of the steering column.
5. Disconnect the electrical connectors from the ignition switch. There may be several connectors, so take care not to damage them.
6. Remove the bolts that hold the ignition switch in place. There are usually two or three bolts.
7. Remove the ignition switch from the steering column.
To install a new ignition switch, simply reverse the steps above.
