- Lug wrench
- Jack and jack stands
- Socket wrench set
-Phillips-head screwdriver
-Flat-head screwdriver
-Hammer
1. Park your Kia Sorento on a level surface and turn off the engine. Engage the parking brake.
2. Loosen (do not remove) the lug nuts on the wheel covering the rotor you wish to change using the lug wrench.
3.Lift the Kia Sorento with your jack and secure it using the jack stands.
4. Remove the lug nuts and take off the wheel
5. Use a Phillips head screwdriver to remove the two screws holding the caliper in place.
6. Slide the caliper off the rotor.
7. Use a flat-head screwdriver to pry off the old rotor.
8. Place the new rotor on the hub and reinstall the caliper.
9. Reattach the caliper with the two screws.
10. Replace the lug nuts on the wheel and tighten them with the lug wrench.
11. Remove the jack stands.
12. Lower the vehicle with the jack.
