2. Pry up the door panel clips. There are eight clips that hold the door panel in place. Use a flathead screwdriver or pry bar to pry up the clips. Start by prying up the clips at the bottom of the door panel.
3. Lift off the door panel. Once all of the clips have been pried up, carefully lift the door panel off of the door.
4. Disconnect the door panel connectors. There are two electrical connectors that connect the door panel to the door. Disconnect the connectors by pressing down on the tabs and pulling the connectors apart.
5. Remove the door panel. Once the connectors have been disconnected, you can remove the door panel from the door.