1. Remove the door sill plate. It is held in place by three screws.
2. Remove the window crank handle. Use a flat-head screwdriver to pry off the cap, and then unscrew the handle.
3. Remove the screws holding the door panel in place. There are two screws located in the handle recess, two screws behind the door handle, and one screw located near the bottom of the panel.
4. Use a pry tool to gently pry the door panel away from the door. Start at the bottom of the panel and work your way up. Be careful not to damage the door panel or the door.
5. Remove the door panel from the door. Once the panel is loose, lift it up and off of the door.
6. Disconnect the electrical connections. There are two electrical connections that need to be disconnected: the power window switch and the door lock switch.
7. Remove the door trim. The door trim is held in place by a series of clips. Use a pry tool to pry the clips loose and remove the trim.
To reinstall the door trim and panel, simply follow these steps in reverse order.
