1. Check the EVCS Circuit:
Inspect the wiring and connections to the EVCS. Look for any loose or damaged wires. Make sure the connectors are securely fastened and there is no corrosion. Clean any corrosion you find using an appropriate contact cleaner.
2. Test the EVCS Solenoid:
Disconnect the electrical connector from the EVCS solenoid. Use a multimeter to test the solenoid for continuity. If there is no continuity, the solenoid needs to be replaced.
3. Check the Engine Oil Level:
Low engine oil level can cause this error code. Ensure that the oil level is at the recommended level. Use the dipstick to check the oil level. Add oil if necessary.
4. Consult a Professional:
If the above steps do not resolve the issue, seek assistance from a professional mechanic or consult a Hyundai service manual for further troubleshooting steps. Specialized diagnostic tools may be required to pinpoint the exact cause of the error code.
Remember to disconnect the negative terminal of the battery before disconnecting any electrical components to avoid potential damage.
