- New Rear Wiper Blade
- Phillips head screwdriver
- Pliers
- Clean cloth
Instructions:
1. Park your vehicle in a safe location and turn off the engine.
2. Locate the rear wiper arm. It is located at the top of the rear window near the center of the vehicle.
3. Use the Phillips head screwdriver to loosen the retaining clip that holds the wiper blade in place.
4. Once the clip is loose, use your hands or the pliers to carefully remove the wiper blade from the arm.
5. Clean the surface of the wiper arm with a clean cloth. This will help to ensure that the new wiper blade will fit properly.
6. Take your new wiper blade and align the attachment point with the wiper arm.
7. Press the new wiper blade into place and secure it with the retaining clip that came with the blade.
8. Test the new wiper blade by turning on the rear windshield wiper. Make sure that the blade operates smoothly and effectively.
Note:
- If your rear wiper blade is stuck, you may need to use pliers or a flathead screwdriver to pry it off the arm.
