* Socket set
* Wrench set
* Screwdriver
* Safety glasses
* Jack and jack stands
Materials
* New starter
* Gasket
* Lockwasher
* Bolts
Instructions
1. Park your car in a safe location and turn off the engine. Engage the emergency brake.
2. Jack up your car and support it on jack stands.
3. Remove the negative battery cable.
4. Locate the starter on the passenger side of the engine, between the engine and the transmission.
5. Disconnect the electrical connections to the starter.
6. Use a wrench to loosen the bolts that hold the starter in place.
7. Remove the starter from the car.
8. Inspect the starter and replace any damaged parts.
9. Install the new starter in reverse order of removal.
10. Reconnect the battery cable.
11. Lower your car off the jack stands and test the starter.
