1. Gather the necessary tools:
• New wiper blade
• Small flat-head screwdriver or plastic pry tool
2. Locate the rear wiper:
• The rear wiper is located at the back of the vehicle, on the rear window.
3. Unhook the old wiper blade:
• Press the small tab at the base of the wiper arm with the flat-head screwdriver or plastic pry tool.
• While pressing the tab, pull the wiper blade straight out from the arm.
4. Install the new wiper blade:
• Slide the new wiper blade onto the wiper arm, aligning the hook on the blade with the hole on the arm.
• Press down firmly until the hook snaps into place.
5. Test the rear wiper:
• Turn on the rear wiper and check that it moves smoothly and clears the rear window effectively.
6. You're done!
