- A 10mm wrench
- A Phillips head screwdriver
- A clear plastic hose
- A container of brake fluid
1. Remove the air cleaner assembly to access the clutch master cylinder.
2. Locate the bleeder valve on the clutch master cylinder. It is a small, black screw with a rubber cap.
3. Remove the rubber cap from the bleeder valve.
4. Attach one end of the plastic hose to the bleeder valve and the other end to the container of brake fluid.
5. Use the 10mm wrench to loosen the bleeder valve.
6. Press the clutch pedal all the way down.
7. While the clutch pedal is down, close the bleeder valve.
8. Release the clutch pedal.
9. Repeat steps 5-8 until there are no more air bubbles in the plastic hose.
10. Tighten the bleeder valve.
11. Reattach the rubber cap to the bleeder valve.
12. Reinstall the air cleaner assembly.
