1. Gather Tools:
- Phillips-head screwdriver
- Flat-head screwdriver
- Pliers
2. Remove Door Trim:
- Open the door and locate the small triangular cover located near the mirror.
- Use the flat-head screwdriver to pry it off.
- Remove the Phillips-head screws underneath the cover to access the mirror.
3. Remove the Mirror:
- Locate the nuts holding the mirror in place.
- Use the pliers to loosen and remove them.
- Gently pull the mirror out of its housing.
4. Inspect the Mirror Housing:
- Check the mirror housing for cracks or damage. If there are any cracks, you may need a new housing.
5. Tighten the Bolts:
- If there is no damage, tighten the bolts that hold the mirror in place.
- Use the pliers to tighten the nuts securely.
6. Reinstall the Mirror:
- Gently push the mirror back into the housing.
- Make sure it is securely seated and aligned properly.
7. Reattach the Door Trim:
- Replace the screws you removed earlier to secure the door trim.
- Snap the triangular cover back into place.
8. Test the Mirror:
- Fold and unfold the mirror to ensure it is repaired, moves smoothly, and stays in place.
If you encounter any difficulties during the repair, it may be best to consult a professional mechanic to ensure proper repair and safety.
