1. Park the vehicle in a safe location and turn off the engine.
2. Open the hood of the vehicle.
3. Locate the turn signal lamp assembly.
* The turn signal lamp assembly is located on the front of the vehicle, on the side that is experiencing the issue.
4. Remove the turn signal lamp assembly.
* To remove the turn signal lamp assembly, you will need to use a screwdriver to remove the screws that hold it in place.
5. Inspect the turn signal lamp.
* Once you have removed the turn signal lamp assembly, you will need to inspect the bulb to see if it is burned out.
* If the bulb is burned out, you will need to replace it with a new bulb.
6. Reinstall the turn signal lamp assembly.
* Once you have replaced the bulb, you can reinstall the turn signal lamp assembly.
* To reinstall the turn signal lamp assembly, you will need to use a screwdriver to replace the screws that you removed earlier.
7. Test the turn signal lamp.
* Once you have reinstalled the turn signal lamp assembly, you will need to test it to make sure that it is working properly.
* Turn on the vehicle and turn the turn signal switch on.
* The turn signal lamp should blink when the turn signal switch is activated.
8. Close the hood of the vehicle.
* Once you have verified that the turn signal lamp is working properly, you can close the hood of the vehicle.
