Locate the turn signal housing: The turn signal housing is located on the front of the vehicle, on either side of the grille.
Remove the turn signal housing: To remove the turn signal housing, gently pry it out from the side closest to the center of the vehicle. Be careful not to break the tabs that hold the housing in place.
Rotate the bulb socket: Once the turn signal housing is removed, you will see the turn signal bulb socket. Rotate the socket counterclockwise to remove it from the housing.
Remove the old bulb: Once the bulb socket is removed, you can remove the old bulb. To do this, simply pull the bulb straight out of the socket.
Install the new bulb: To install the new bulb, simply insert it into the socket and turn it clockwise until it is secure.
Reinstall the bulb socket: Once the new bulb is installed, reinstall the bulb socket by rotating it clockwise until it is secure.
Reinstall the turn signal housing: Once the bulb socket is reinstalled, reinstall the turn signal housing by gently snapping it back into place.
Test the new turn signal: Turn on your headlights and hazard lights to test the new turn signal.
