1. Insert your key into the ignition and turn it to the "ON" position without starting the engine.
2. Locate the odometer and trip meter buttons on the instrument cluster.
3. Press and hold the "TRIP" button for a few seconds until the maintenance reminder indicator starts blinking.
4. While holding the "TRIP" button, press and hold the "ODO/SET" button for a few seconds.
5. Release both buttons and turn off the ignition.
6. Start the engine to verify if the maintenance required light has been reset.
Method 2: Through the OBD-II Port
1. Connect an OBD-II scanner to the OBD-II port of your vehicle, which is usually located under the dashboard on the driver's side.
2. Turn the ignition to the "ON" position without starting the engine.
3. Navigate through the scanner's menu until you find the option to reset the maintenance required light.
4. Follow the instructions on the scanner to reset the light.
5. Turn off the ignition and disconnect the scanner.
6. Start the engine to verify if the maintenance required light has been reset.
Note: If neither of these methods works, you may need to take your vehicle to a professional mechanic for resetting the maintenance required light.
