Tools Needed:
- 10mm Socket Wrench
- Flat-head Screwdriver
- Rag
Procedure:
1. Turn Off the Engine and Engage the Parking Brake: Ensure that the vehicle is parked on a flat surface, the engine is turned off, and the parking brake is engaged.
2. Locate the Wiper Arms: Open the hood of your vehicle and locate the wiper arms. These are the long metal arms that hold the wiper blades against the windshield.
3. Remove the Windshield Cowl: Identify the windshield cowl, which is a plastic covering located at the base of the windshield. Using a flat-head screwdriver, gently pry the cowl loose and remove it.
4. Locate the Wiper Link: Once the cowl is removed, you should see the wiper mechanism, including the wiper link. The wiper link is a metal rod that connects the wiper motor to the wiper arms.
5. Disconnect the Wiper Motor: Use a 10mm socket wrench to loosen and disconnect the nuts or bolts that hold the wiper motor to the linkage. Be careful not to drop the nuts or bolts.
6. Remove the Old Wiper Link: Once the wiper motor is disconnected, you should be able to slide the old wiper link off the wiper motor shaft and disconnect it from the wiper arms.
7. Install the New Wiper Link: Take the new wiper link and slide it onto the wiper motor shaft. Make sure it's securely in place.
8. Reconnect the Wiper Motor: Reinstall the nuts or bolts that hold the wiper motor to the linkage. Tighten them securely using the 10mm socket wrench.
9. Reinstall the Windshield Cowl: Carefully place the windshield cowl back into its original position and press down firmly to secure it.
10. Test the Wiper System: Turn on the vehicle and test the wiper system to ensure proper functionality. The wipers should move smoothly across the windshield.
Remember, if you're uncomfortable performing these steps or lack the necessary tools, it's best to consult a professional mechanic or refer to the vehicle's repair manual for specific instructions related to your Honda Accord model.
