- 10mm socket wrench
- 12mm socket wrench
- 14mm socket wrench
- 17mm socket wrench
- Ratchet
- Extension
- Flat-head screwdriver
- Replacement alternator
- New serpentine belt
Instructions:
1. Disconnect the negative terminal of the battery.
2. Remove the upper radiator hose.
3. Remove the serpentine belt.
4. Remove the power steering pump.
5. Remove the bracket that holds the alternator.
6. Remove the alternator from the vehicle.
7. Install the new alternator.
8. Reinstall the bracket that holds the alternator.
9. Reinstall the power steering pump.
10. Reinstall the serpentine belt.
11. Reinstall the upper radiator hose.
12. Reconnect the negative terminal of the battery.
Tips:
- Be careful not to drop any bolts or nuts into the engine compartment.
- Make sure that the new alternator is properly seated before you bolt it down.
- Tighten all of the bolts and nuts to the correct torque specifications.
