1. Open the hood of your MR2.
2. Locate the fuse box. It is located on the passenger side of the engine bay, near the battery.
3. Remove the cover of the fuse box.
4. Locate the 100 amp fuse. It is the largest fuse in the fuse box, and it is usually located in the upper-left corner.
5. Use a pair of fuse pullers or needle-nose pliers to remove the 100 amp fuse from the fuse box.
6. Insert a new 100 amp fuse into the fuse box.
7. Replace the cover of the fuse box.
8. Close the hood of your MR2.
Here are some additional tips for replacing the 100 amp fuse in your MR2:
* Make sure that you have the correct size fuse. Using a fuse that is too small could cause it to blow, and using a fuse that is too large could cause damage to your vehicle.
* Be careful when removing and inserting the fuse. The fuse box is live, so be sure to avoid touching any of the other fuses or terminals in the fuse box.
* If you have any questions about replacing the 100 amp fuse in your MR2, please consult your owner's manual or a qualified mechanic.
