- 19mm socket
- Ratchet
- Extension
- Torque wrench
Instructions:
1. Park the car on a level surface and turn off the engine.
2. Turn the steering wheel all the way to the left.
3. Open the hood and remove the steering wheel cover.
4. Locate the steering wheel nut in the center of the steering wheel.
5. Place the 19mm socket on the nut and attach the ratchet and extension.
6. Tighten the nut until it is snug, but do not overtighten. The torque specification for the steering wheel nut is 33 lb-ft.
7. Replace the steering wheel cover and close the hood.
That's it! You have successfully tightened the steering wheel nut on your 1998 Toyota Camry.
