Tools Needed:
- Pry pry tool
- Phillips head screwdriver
- Socket set
1. Locate the door panel clips. There are a total of 10 clips that hold the door panel in place. Seven are located around the perimeter of the panel, and three are located in the center of the panel.
2. Remove the door panel clips. Use a small pry tool to pry up the clips. Once the clips are removed, the door panel can be lifted off of the door.
3. Disconnect the door panel wiring. There are two connectors that need to be disconnected. The first connector is for the power window switch, and the second connector is for the door lock switch.
4. Remove the door panel. Once the wiring is disconnected, the door panel can be removed. Be careful not to drop the panel, as it is heavy.
Here are some additional tips for removing the inside door panel on a Toyota Sequoia:
- Start by removing the screws that hold the door handle in place.
- Once the screws are removed, you can pry the door handle out of the panel.
- Be careful not to damage the door handle when you are removing it.
- Once the door handle is removed, you can start to pry up the door panel.
- Use a pry tool to pry up the clips that hold the door panel in place.
- Be careful not to damage the door panel when you are prying it up.
- Once all of the clips are removed, you can lift the door panel off of the door.
- Be careful not to drop the door panel, as it is heavy.
