The screws are located on the back of the tail light assembly. You can use a Phillips head screwdriver to remove the screws.
2. Disconnect the electrical connector.
The electrical connector is located on the back of the tail light assembly. Simply unplug the connector.
3. Remove the tail light assembly.
Once the screws are removed and the electrical connector is disconnected, you can remove the tail light assembly from the vehicle.
4. Install the new tail light assembly.
To install the new tail light assembly, simply place it in the opening and secure it with the two screws.
5. Connect the electrical connector.
Connect the electrical connector to the tail light assembly.
6. Test the tail light.
Turn on the headlights and brake lights to make sure that the new tail light assembly is working properly.
